Plumbers. Who needs em?

The good news is, significant plumbing system leakages do not typically occur without warning. If you have an older homeowner, however, or if you have the tendency to delay preventative upkeep, below are a few pointers that may save you from calamity.

Are you observing leakages, leaks or reduced water flow? If you have a consistent drip, it could be an indicator that a faucet or fixture needs substitute. If your kitchen area tap instantly stops supplying the powerful stream of water you require, the cause might be a clogged up aerator. Shower heads should end up being stopped up as well as layered with movie. If you're handy, you might want to try a basic change, change a washer, or eliminate as well as cleanse the aerator or filter. If you prefer to not tackle even small repairs, call a specialist plumbing to deal with your worries promptly, effectively and economically.

What staining and also down payment accumulation are you not seeing?

Not all water is the same, and also water high quality can differ dramatically depending on trace minerals as well as ingredients. If you discover discoloration of any type of kind on your fixtures as well as taps, or a white, eco-friendly or brown powder or crusty build-up, you ought to recognize that the same kind of accumulation might be affecting the circulation of water in your pipelines. If you identify these troubles, or if your steel taps end up being pitted, it's smart to have a professional check the plumbing that you could not see. A suggestion may be to install either a whole-house purification system, or some "factor of use" filters.

Latest posts

3 Port Valves and Y Plan Heating Systems – Plumbing Tips

Posted by in Plumber Talk, on March 4, 2018

***VISIT OUR SPONSORS*** | | | |

This video covers the 3 port valve. In particular its position in a Y plan system. We also cover the basics of installing or replaceing a three port valve or head. For more information visit

Hello and welcome to this Plumberparts video. Today, I’m going to tell you about 3-port valves that position the heating system and how to install their control heads. Basically, giving you a brief explanation. If you want anymore detailed information you’ll have to contact us and go to our website at Let’s first have a look at the position of the 3-port valve in the heating system. This pipe here is the flow from our boiler, okay? It comes up here through the pump, is pumped up through this pipe here to our 3-port valve here, Okay? Now what the 3-port valve then does is divert hot water, either through here into the coil of the hot water tank and back out to the boiler, or, through here, which is off down to the heating system, okay, to the radiators.
Now it does that according to whether it is being controlled by either the thermostat on the side of the tank, this side, or your thermostat in your room. Now, we should send it off down this side. Now that might sound simple enough but the complication comes in when you try to wire them in. For most heating engineers like me, or other people who are experienced in this, it’s an easy thing to do. But if you don’t know what you are doing, you can easily get in an electric shock, or the system just won’t work properly at all. Now only do this if you know what you’re doing and you’re competent with electric, okay, and you have a tester. For God’s sake don’t touch anything that you haven’t tested first, okay?
So here’s the control box. I’m just going to remove this cover. Right. So that is why you take the cover off and you look at that and you say, oh, my God, what is going on here? Once you isolate each wire, find out what it does, then you’re in a much better position, okay, and you’ll be able to figure it out a bit easier, with any luck. Now we can have a look at this. This is our replacement head, okay. But, I’ll tell you what these wires do and basically how this works, okay, becomes sometimes there can be confusing the three-port valve type because when it’s only on heating, it has to have a separate live that keeps the boiler and pump on, okay? Now, so what we have here is pretty simple. We have our standard wire here, this is our earth wire. That goes into the earth. This is our neutral, okay? Now these two here are our signal wires, okay. Now, on a two-port valve you have a …

RADIATOR INSTALL – Job Report – Plumbing Tips

Posted by in Plumber Talk, on March 3, 2018

All about how to fit 2 radiators on the same line of pipe. Known as a two pipe system. We cover everything from installing the radiator on the wall to piping up the radiator underneath. If we’ve missed anything then it’ll be somewhere else on the channel so pop over there and have a search!







***VISIT OUR SPONSORS*** | | | |…

How to Solder Copper Pipe The CORRECT Way | GOT2LEARN

Posted by in Plumber Talk, on March 2, 2018

This video will explain to you in details how to solder copper the CORRECT way so you can do it yourself and not have to pay an expensive plumber and save TONS OF $$$$!

Go visit Construction Fasteners & Tools for great price on tools and equipment!


Visit my Amazon store: Got2Shop
Here are the links to the products I used in this video:

Torches I used in the video:




Here are the gases I used:

Propane gas:


95/5 Solder:

50/50 Solder:


Let me know what you think by commenting and rating this video!

To become a Got2Learn Subscriber:

You can also follow me on Instagram and Facebook, I post pictures and videos daily of any project I am implicated in, thanks!


**Don’t forget to SUBSCRIBE, LIKE & SHARE to help make the channel grow and also to be eligible to win some COOL prizes. Also, click the “BELL” icon next to the subscribe button to be notified when my next videos are released !

Cold Funk – Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (

How to Join Copper & Plastic Pipe – Plumbing Tips

Posted by in Plumber Talk, on March 1, 2018

Roger Bisby visits his favourite plumber’s merchant and shows you how to join copper and plastic pipes.

How to Solder Copper Pipes & Avoid Leaking Water:

Plumbing tricks and cheat sheets are something we want to bring to you more often. Please be sure to get in touch and let us know what you need help with on plumbing basics and DIY advice.

Visit Redhill & Maidstone Plumbing Centres:

Thanks for watching our video on joining copper and PVC water pipes. Let us know if you’d like to see any more plumbing advice and tips videos.

Don’t forget to stay up to date with Skill Builder!

Get in touch and send us your pictures and videos –
Join our mailing list –
See our Tweets –
See our Facebook Page –…

Watch This Video Before Using Roof Vents To Unclog Drains – Plumbing Snake Tips

Posted by in Plumber Talk, on February 27, 2018 Click on this link for more information about plumbing repairs, bathroom remodeling and home building. In this video I hope to explain a few things you should consider before using the plumbing vent pipes that stick out of your roof to unclog a plugged drainpipe with the plumbing snake. The design and layout of the pipes can make all the difference in the world on whether or not you can actually use the vent pipe with a success.…


Posted by in Plumber Talk, on February 24, 2018

***VISIT OUR SPONSORS*** | | | |




Ever wondered how to heat your pool with an air source heater and a bird feeder? WELL NOW’S THE TIME TO FIND OUT!!!

INTERIOR DESIGNING TIPS | PLUMBING DESIGN LAYOUT | How does water flow from overhead tanks to toilet

Posted by in Plumber Talk, on February 23, 2018

Design destination

PLUMBING DESIGN LAYOUT – How does water flow from overhead tanks to toilets

Hello friends this is short video on plumbing layout details, how to set up your plumbing pipes for water flow from over head water tank to your toilets.
if this video helps you , please support us.